Multiphase Pump Type Series MPC
Because of the increased liquid hold-up capability, this type is especially suited for high gas volume fractions (GVF >97 %). Extended dry-running periods can be achieved, as it might be necessary for handling a gas cap. Numerous applications as wet-gas compressor, e.g. with liquid loading of gas well, show the excellent technical design of this pump.
As a standard the maximum allowable working pressure is 100 barg (acc. to ANSI B16.5 600 lbs.). However higher pressure ratings are possible and already executed.
Capacities | up to 2.000 m³/h (300.000 bpd) |
Differential pressure | up to 70 bar (1.000 psi) |
Dry Running times up to 60 min | |
- Ridgid Construction due to welded casing,
pressure rating up to ANSI 300lbs
(up to 50 bar operational pressure),
simple "in field" maintenance due to replaceable liner,
optimal material selection due to engineered rotors,
non contact pumping elements, forced lubrication system and/or
cooling system not required,
single acting mechanical seals with pressure less buffer fluid
system acc. API plan 52 or clean fluid injection acc.to API plan 32.
Old Onshore field with low wellhead pressures,
New Onshore Field developments, specially with high viscous crude oil, steam injected fields
Replacement of conventional separation technology onshore